OEM ODM small diesel generator sets
description1
Products pecifications
model |
power |
current |
number of poles |
speed |
power factor |
Supporting engine |
|
kVA |
kW |
A |
r/min |
COS |
HP |
||
STC-3 |
3.8 |
3 |
5.4 |
4 |
1500 |
0.8 |
10 |
STC-5 |
6.3 |
5 |
9 |
4 |
1500 |
0.8 |
10 |
STC-7.5 |
9.4 |
7.5 |
13.5 |
4 |
1500 |
0.8 |
12 |
STC-8 |
10 |
8 |
14.4 |
4 |
1500 |
0.8 |
12 |
STC-10 |
12.5 |
10 |
18.1 |
4 |
1500 |
0.8 |
15 |
STC-12 |
15 |
12 |
21.7 |
4 |
1500 |
0.8 |
15 |
STC-15 |
18.8 |
15 |
27.1 |
4 |
1500 |
0.8 |
18 |
STC-20 |
25 |
20 |
36.1 |
4 |
1500 |
0.8 |
25 |
STC-24 |
30 |
24 |
43.3 |
4 |
1500 |
0.8 |
28 |
STC-30 |
37.5 |
30 |
54.1 |
4 |
1500 |
0.8 |
30 |
Product advantages
Energy-efficient
It uses high-quality diesel engine, with low fuel consumption rate and high thermal efficiency. Its economy is better than similar gasoline units. It can be equipped with intelligent speed regulation system to automatically adjust the speed according to the load, thus further reducing fuel consumption.
Stable and reliable
The all-copper brushless generator has small voltage output fluctuation (±1%), suitable for precision electronic equipment; the reinforced steel body is anti-vibration and rust-proof, and can adapt to high temperature, high humidity, sand and dust and other harsh environment.
Easy to use
Integrated design, can be equipped with pulleys, single person can move (5-20kW model); one key start/stop, built-in protection device (overload, short circuit, low oil pressure alarm, etc.).
Power Calculation
Total power=sum of rated power of all electrical appliances x 1.2 (safety factor)
Electric motors need to be calculated based on 3 times the starting power
Maintenance points
Routine maintenance
Every 50 hours: Check the oil level (recommended CD grade or above)
Every 100 hours: Clean the air filter
Long term storage
Drain the fuel (prevent gum deposition)
Run without load for 15 minutes every month
Common fault handling
Difficulty starting: Check the battery voltage (not less than 12.6V)
Insufficient power: Clean the diesel filter element
safety warning
Must be well grounded (grounding resistance ≤ 4 Ω)
Prohibited from use in confined spaces (to prevent CO poisoning)
Shutdown for cooling during refueling (fire and explosion prevention)






